Benefits to Elastomeric CCF
- Smooth, durable external surface is easily cleaned and resists
dirt, moisture absorption, and microbial growth even
if torn or punctured
- CFC free, non-fibrous, non-dusting, and non-toxic
- Higher temperature limit than polyethylene CCF, able to withstand
service temperature spikes without permanent failure
- More flexible than polyethylene CCF at 75°F, allowing
expansion and contraction in hot and cold cycle applications
- Resists compression and retains its thermal insulating capacity
- Outer moisture vapor barrier or liner not required
Ratings
Complies with NFPA 90A and 90B, UL 723/ASTM E84, ASTM G-21 (Fungi
Resistance), ASTM C 534, UL 181 (Mold Growth/Humidity and Air
Erosion), UL 94, UL 723, NY City MEA, City of Los Angeles RR,
MIL-P-15280J
Closed Cell Foam Guide Specification
Option: Provide Elastomeric Closed Cell Foam Insulation in lieu
of standard. Insulation shall conform to UL 181 for erosion and
NFPA 90A for fire, smoke and melting, and comply with a 25/50
Flame Spread and Smoke Developed Index per ASTM E-84 or UL 723.
Additionally, insulation shall comply with Antimicrobial Performance
Rating of 0, no observed growth, per ASTM G-21. Polyethylene insulation
is not acceptable.
Additional Anti-Mold Strategies
- Available On All ENVIRO-TEC Fan Coil Products:
- IAQ Drain Pan: sloped toward drain connection,
stainless steel construction, externally insulated, easily
removed for cleaning
- Easily Removable Filters and Coils for
replacement and cleaning
- Large Coil Face Area to reduce condensation
blow-off
- Available On VH Series Fan Coil Units:
- Motorized Coil Bypass Damper and Variable
Speed Fan Coil for dehumidification during part-load conditions
- Synthetic Media Filter does not support
mold growth
- Ship In Advance Risers allows installation
and pressure testing during building construction, prior
to units arriving on job site
- Supply and Return Air Knockouts, left
in place during building construction to keep unit interiors
clean
Resources
|